OneCNCXR8 Release 62.70

We released today  OneCNCXR8 Version 62.70

This is an important update with changes from our internal testing and user reports.:

HS  Mill Pocketing (Closed)
Mill pocketing had a problem if the Z was a positive value ian open style pocket was created. This is corrected in this release.

Languages
Japanese language was updated in this release.

OneCNCXR8 Version 62.70 is available now in the OneCNC Update Server for all OneCNCXR8 licenced users.

OneCNCXR8 Release 62.67

This release has many functional adjustments from our internal testing and user reports.

1457 Pocketing
Last cut Zigzag toolpath was not generated in some settings, This has been corrected in this release

 1456 Scissor Function
Scissor sketch not working properly has been corrected in this release.

1455 Mill Profile
Mill Profile, Cut Chain lead-in and lead-out angle could not be set to 0. This has been adjusted in this release.

HS Pocket Closed
Adjustments were made to tapered tool and ball nose tool use. This can be particularly seen if using depth of pocket where the tip radius of the tool is larger than the depth of the pocket.

HS Open Pocket
Adjustments were made. This can be particularly seen if using depth of pocket where the tip radius of the tool is larger than the depth of the pocket.

Drill Function
Adjustments were made for Invalid tip radius in Tool Selection

Lathe Turn Offset Function
The rough offset was not working and has been corrected.

Split with Plane Function
Using this function was was removing the surface colour. This is necessary for this function.

Clean Circle
Was creating extra finish pass in certain settings. This has now been corrected.

 Lathe Flat Area Machining
Was not working in Y axis mode in some cases. This has now been corrected

5 Axis Simultaneous            
Tool tip/Ball Centre not working now solved.

 Languages
German Language update was added in this release.

This release is now available in the OneCNC update server for licenced OneCNCXR8 users.

OneCNCXR8 Release 62.66 was released today and is available in the OneCNC Update Server

Major New Functionality Update
This release includes a major functionality update. The latest Solidworks 2020 direct import of SLDPRT files into OneCNCXR8 is now supported.

This release has many updates and adjustments from our internal testing and also includes a large number of fixes and changes to correct the following reports.

Solidworks 2020 added
Solidworks 2020 file direct import is now supported. Remember this is only available in 64 bit as Solidworks is no longer supported in 32 Bit OS

Extracting an edge
There was an adjustment to this function

Helix Pocket Entry
In certain settings and applications it was reported that helix entry gouged on entry this is now corrected.

Ramp entry Pocket Setting
There was a report that zig zag entry was going lower than the set finish value and thia has been corrected in this version

4 axis Full Function
There was an adjustment to posting

Open Pocket
Open pocket reports bad contour in some cases has been corrected in this release

Posting Toolpath
In some cases post was not writing name of the selected tool function dialog. This has been corrected

Pocket Finish Pass
Pocket finish problem in/out arc if 0 value was used has been corrected.

DXF Export
DXF Export fails if model visible this is now corrected.

Pocket Finish
Unexpected compensation off (G40) move in pocket finish was corrected in this release.

Coolant Setting
If No Coolant selected caused incorrect tool change posting has been corrected in this release.

Open Pocket
Open Pocket using tapered tool produces too much offset and this has been corrected in this release. The tool definition has been adjusted to accept tapered tools with full tip radius (ball end)

Translation
New updated Chinese translation has been added to this release.

Engrave All
There was a sample file for engrave all example which was wrong this has been replaced with the correct one.

NOTE:
The new Solidworks 2020 file import import is only available in the OneCNMCXR8 64 Bit install version

Windows 10 "Professional version 64 bit" should be used for use Solidworks import.

OneCNCXR8 Version 62.66 available now in the OneCNC Update Server for all licenced OneCNCXR8 users.